View BCM5365_1119249.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCM5365/BCM5365P
(R)
SENTRY 5 PRODUCT LINE: BCM5365/BCM5365P SECURED SWITCH PROCESSORS
FEATURES * The most highly integrated access security processors * 5-port 10/100 Ethernet switch with integrated PHY (TX/FX)
* IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues - CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning Tree) support * 802.1X protocols, IP multicast, IGMP snooping for video streaming applications, broadcast suppression, and hosting of multiple subnets * 128-KB on-chip packet buffer * Complete on-chip IPSec processing * Supports AES, DES, 3DES, HMAC-SHA1, HMAC-MD5, SHA-1, MD5 * 75-Mbps AES/3DES/HMAC-SHA1 * Single-pass encryption and authentication * General purpose 200-MHz MIPS32TM Processor* * 8 KB of instruction cache, 4 KB of data cache * Supports Linux(R), and VxWorks(R) operating systems
SUMMARY OF BENEFITS * System-on-a-chip solution offers optimal price/performance
ratio and form factor, low power dissipation, and fastest time to market * Integration of managed five-port Fast Ethernet switch * Integration of MIPS32 CPU with silicon-proven IPSec processor facilitates complete packet processing in one pass for multiple policy-based packet routing and/or packet transformations (firewall, NAT, VPN, QoS) * Enables advanced application development with industrystandard operating systems/platforms/tools * Widely proliferated high-performance MIPS32 CPU enables advanced application development with industry-standard operating systems/platforms/tools * Extensive application software offered * IPSec (VPN), PPTP (passthrough), PPPoE client * NAT, filtering (IP, TCP), dynamic firewall, DMZ * Ethernet routing, static routing, DHCP server/client * Compatible with other Broadcom devices, enabling optimal system-level form factor, costs, and power dissipation
* BCM5365P supports PCI 2.2, 32-bit/33-MHz host/slave
interface * Supports four additional PCI devices in host mode * Extensive interface flexibility * Interface to flash memory (up to 32 MB) * Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz) * GPIO, USB, UART interface * JTAG/EJTAG support
* 400-pin PBGA package * Low power, 1.8V core, 3.3V I/O operation * Linux Open Source application software support
* Third-party software support
BCM5365/5365P-Based System Applications
BCM5365-Based Wired Home Router
SDRAM(32MB)
BCM5365P-Based Wireless Router
SDRAM (Up to 512 MB) FLASH (Up to 64 MB)
TX/RX Wireless MAC PCI
FLASH (2 MB)
Clock (25 MHz)
BCM2050
BCM430X
BCM5365
BCM5365
BCM5365P
BCM5365
Clock (25 MHz)
Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45
Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45
Magnetics RJ-45
Magnetics RJ-45
DMZ 4-Port 10/100 LAN 10/100 WAN
4-Port 10/100 LAN
10/100 WAN
OVERVIEW
SDRAM I/F
GPIO
On-Chip Bus
USB
UART
FLASH I/F
8-KB I-CACHE 4-KB D-CACHE
On-Chip Bus
On-Chip Bus
PCI 2.2 Host
(32-Bit/33-MHz)
200-MHz MIPS32 Core
MMU
VPN Processor
Symmetric Key Engine
75 Mbps
On-Chip Bus
Ethernet MAC/MII Ethernet Switch Controller
4-Port 10/100 LAN PHY
10/100 WAN PHY
128-KB Packet Buffer
Note: PCI Interface Supported in 5365P Only
Broadcom's BCM5365 and BCM5365P, two System-On-Chips, are the most highly integrated access secure switch processor there are. The BCM5365/BCM5365P also features an on-chip, five-port 10/100 Ethernet switch with management features. This secured switch processor also offers extensive processor and interface integration featuring an integrated 200-MHz MIPS32TM core, UART, flash and SDRAM/DDRAM interfaces. The BCM5365P also supports a PCI interface. The BCM5365/BCM5365P (via dedicated cores) supports a wide range of cryptographic algorithms: AES (up to 256-bit CTR and CBC modes), DES, 3DES (CBC), HMAC-SHA1, HMAC-MD5, SHA1 and MD5. Both the devices support IPSec encryption and authentication in a single pass. The integrated 200-MHz MIPS32TM core of the BCM5365/BCM5365P has a 2-way set-associative 8-KB instruction cache and a 4-KB data cache The CPU includes the MMU, which enables support for various RTOS. The BCM5365/BCM5365P also supports interfaces that enable systemlevel cost savings, a better form factor, and lower power dissipation. The BCM5365/BCM5365P supports up to 512 MB of SDRAM/DDRAM and 64 MB of flash memory.
The BCM5365P also supports the PCI version 2.2, 32-bit/33-MHz host interface, allowing enumeration of four external PCI peripherals as a way to extend system functionality. The UART enables a glueless interface to serial devices such as modems. Broadcom provides its proven IPSec API and drivers for integration with third-party application software. Broadcom also offers application software to build complete system applications. Application software support includes functions such as firewall (dynamic firewall, DMZ hosting, filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers an d API, PPTP-passthrough , PPPo E client-PAP and CHAP authentication), QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging), and many other features. A single BCM5365/BCM5365P based platform is easy to reuse for other types of access to market segment equipment ranging in throughput performance from T1/E1 to 100 Mbps. This equipment includes wireless and wired home/residential and SOHO firewall and VPN appliances, wireless access points, and many types of customer premises equipment (CPE) devices.
Broadcom(R), the pulse logo, and Connecting everything(R) are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners.
(R)
BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013
(c) 2004 by BROADCOM CORPORATION. All rights reserved. 5365_5365P-PB01-R 04/01/04
Phone: 949-450-8700 Fax: 949-450-8710 E-mail: info@broadcom.com Web: www.broadcom.com

▲Up To Search▲

Price & Availability of BCM5365

	To Download BCM5365 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .